On a hot summer day the water in a little state pool is heated obviously. When the weather is heat time is prolonged or, in general, the temperature doesn’t reach a comfortable temperature of +22oC. In massive pools organic heating takes even longer. To solve this problem, created a heater for the pool, working out of different energy sources.
The simplest water heater to the swimming pool is a heat exchanger. The basis of the design is a tank, through which the warm liquid flows. It is joined to the heating system or any flowing water heater. Inside the tank is an integrated coil. This part is the heat exchanger. Pool water circulates through the coil, warmth from the hot liquid in the tank.
Why do you want such a complex pool heater if you can just run the water right throughout the heater? You can use this type of strategy, but there are two problems:
- The swimming water contains tiny particles of chlorine and other impurities. When heated, they settle on the walls of the heat exchanger as a solid sludge, clogging it.
- Pool water is saturated with oxygen, which divides the metal walls of this heat exchanger.
To pricey boiler or leak heater doesn’t neglect, the heating process is equipped with another loop. The heat exchanger is simpler and cheaper to change whether it becomes clogged or leaks from oxidation of these walls.
In a tiny children’s pool piping is put to the principle of the system”underfloor heating system”. A small amount of water that the coil will heat fast, and with a huge volume won’t cope. Electric versions
The 2nd most popular is the electrical heater for your pool, composed of a machine, heating components along with a thermostat. Devices come in 2 types:
- Accumulation. The device is made up of huge tank, in which the water is heated from the heating elements, and from that point it’s fed into the pool.
- Flow-through. The unit is connected to the water treatment system of the pool. There’s a filter in front of the water heater, which moves purified water, which eliminates the creation of strong deposits.
- Depending on the capacity, the apparatus are linked to single-phase and three-phase networks.
The need to warm a massive remonttool.ru quantity of water requires the use of strong devices. Electricity prices are huge, plus you want to lay a separate field of wiring. Heat pump
Rather complicated from the device of the heater for the pool heat pump identifies advanced technology. The gadget is efficient and cost-effective, but it is rarely used due to its high cost.
Important: The heat pump works on the principle of this refrigerator, just here the circuit which releases heat, not cold, is in demand.
The system is made up of two circuits, in which the fluid circulates. The outer pipe has been placed underground, at the bottom of the reservoir or other location where you are able to extract the heat. The inner circuit is placed within the pool. It gives the water the heat extracted from the outer pipe.