The Best Way to Paste wallpaper at the corners: Directions, gluing outer, inner corner, docking

Step by step instructions to gluing inner corners

After finishing, the most important problem can be uneven walls and the resulting folds on the wallpaper. It’s also crucial to take into consideration that if the walls are crookedthe joints of background canvases might invisibly.

After gluing the last one in the front of the inner corner of the cloth should measure the remaining space. It is measured from the border of the pasted cloth to the adjacent wall, the resulting figure is added 10-15 millimeters. If the walls are very curved, the further figure could be .

Cut a strip equivalent to the resultant figure, taking into consideration the allowance. The surfaces are treated with adhesive. Based on the sort of coat it could be precisely the wall or both surfaces.

The strip has been glued independently using the cut side into the wall. The background should go on the other airplane.

In case the glued wallpaper is wrinkled, you want to make a few modest cuts perpendicular to the folds.

Level or incline on the adjoining wall is a vertical lineup. The distance from the corner is equal to the diameter of the prior cut strip, not adding additions.

The surfaces have been smeared with adhesive, and the coating is glued into the wall with the flat side to the line. The cut goes onto the adjacent wall.

How to glue the outer corner (outer corner)?

Protruding corner ought to be glued by analogy using an inner, but there are small differences, which gidpola.ru also need to be taken into account when working.

Measured the space remaining out of the glued wallpaper to the adjoining wall. Add 20-25 millimeters to the figure.

A segment is cut away, taking into account the added 20-25 millimeters.

Before gluing, the surfaces have been treated with adhesive.

The even edge has to be glued into the background fixed onto the wall, your own cut side”extends” into the next plane. If needed, small cuts are made in the place of going to another wallpaper, smoothed and pushed into the wall.

Draw a vertical strip onto the adjoining wall at a distance of only glued cut strip and 6-10 millimeters.

After applying the glue, the strip is then put on the wall using its flat side towards the marked line, going over the border of this glued strip.

The joints are smeared with glue and ironed with a roller. After that, the top layer is trimmed along the ruler and the 2 layers are joined together.

  • aed engineering